English
عربي Tin Free Tinplate-TFS
| Product: | Tinplate Coil/Sheet |
| Thickness: | 0.15-0.50mm |
| Width: | 712-1018mm |
| Tin coating（g/m2）: | 1.1/1.1, 2.0/2.0, 2.8/2.8, 5.6/5.6 |
| Temper: | T1,T2,T3,T4,T5,DR7,DR8,DR9 |
| Annealing: | CA，BA |
| Surface: | Stone/Bright/Rough/Sliver |
| Grade: | SPCC/MR |
| standard: | GB/T 2520-2008, JIS G3303-2008 ,DIN EN10203 |
| Packaging： |
For coils: Anti-rust paper +metal cover +corner protected +wood skid Laded into 20 feet container with max weight 25 tons For sheets: Thin plastic film +rust-proof paper +metal cover +metal angles + straps + pallet. Loaded in 20 feet container with max weight 25 tons |
| Roll width | 600mm to 980mm |
| Coil Diameter | Inside diameter: 508mm (standard) |
| Outside diameter: normally 1,000 ~ 1,250mm | |
| Payment: | T/T or L/C |
| Application: |
Food Cans (Beverage Cans, Milk Cans, Fruit Cans, Tomato Cans, Edible oil etc. ) Industrial Cans (Paint Cans, Chemical Cans, Lube containers) General Line Packaging (Aerosol Can, Gift Cans, Cookies Cans, Stationery Box etc.) |
| Temper Grade | Hardness Guarantee (HR30T) | Applications | |
|
Single Reduced |
T-1 | 49±3 |
Cans, nozzles, and other applications involving deep drawing that requires large flexibility |
| T-2 | 53±3 |
Items that require moderate drawability and some stiffness. |
|
| T-2.5 | 55±3 |
Items that require the drawability of T-2 in combination with the stiffness of T-3 for general uses. |
|
| T-3 | 57±3 |
Proper stiffness is imparted to prevent buckling. For general uses. |
|
| T-4 | 61±3 |
Can bodies, end and crowns that require comparatively large stiffness. |
|
| T-5 | 65±3 |
Can bodies, ends and other applications that require excellent buckling resistance. |
|
|
Double Reduced |
DR-8 | 73±3 |
Bodies of carbonated beverage cans and beer cans that require stiffness and strength. |
| DR-9 | 76±3 |
Ends of carbonated beverage cans and beer cans that require stiffness and strength. |
|
| DR-9M | 77±3 | The same as DR-9. | |
| DR-10 | 80±3 |
Special application that require strength. |
